The KP-86 offers a 4-digit jumper
programmable Master code with repeating digits (allowing 9,000 possible
different codes). The big advantage of the jumper is that even in the event of
a power failure, the unit does not go back to the 1,2,3,4 factory code that
everybody knows, but to your own code. The KP-86 also has the facility of
programming an auxiliary code. This auxiliary code can be given to anybody
needing temporary access, and is very easy to reprogram at anytime.
The KP-86 mounts directly on a
standard gang box. It can be used to enable or disable one or several
detectors. The detectors most commonly used with the PK-86 are:
a)
Magnetic Switches on doors (windows, drawers...)
b)
Passive Infra Red sensors (refer to PIR-86)
The Magnetic switch supplied with
the KP-86 is easy to install above a door, a window, a drawer... It will send
an alarm as soon as the 2 parts are separated.
Different kinds of magnetic
switches are available to fit specific customer requirements.
NOTE: The KP-86 requires an extra
pair of # 18 wires for the power supply.
13) Auto Dialer with
Pre-Recorded Message (AD-86)
·
The AD-86 is an automatic dialer that will dial up to 10 phone numbers in
an alarm condition
·
If the line is busy or unanswered it will try the next number and come
back to the number at a later time
·
The AD-86 will keep dialing until the problem has been fixed or has been
acknowledged
·
It allows remote access via telephone to check status
·
When the phone is answered it reads a pre-recorded message
Click here for more information
 | Back
to Custom Panels |
| Return
to Top of Page |