EMS-S296:

Designed specifically for BASEBOARD HEATERS. In order to further enhance energy savings the baseboard heaters are controlled in two banks. The preheat starts at 50% of total heat capacity and is monitored in real time. Except with very low outside temperatures in rooms with very poor insulation, the EMS-S296 can pre-heat the room with only 50% of available heat. When the rooms are occupied the heating is also easily achieved on 50% or less of total available kW. These features reduce peak kW demand by 50% on top of 36% energy savings. This model also incorporates a slide switch enabling the user to override the pre-set temperature by +/- 1 or 2C.

Depending on options this EMS also controls: Lighting, Fan, Ventilation, A/C. A Summary Alarm output is available.

APPLICATIONS: offices, classrooms, stores… any premises where occupancy is usually predictable and the heating system is baseboard or on/off type of heating system (for modulating type of heat or damper see EMS-SS96). (direct link to EMS-SS96)

For more information click here: EMS-S296 Manual

Designed specifically for UNIT VENTILATORS and HRVs, this EMS can control almost any type of heater (electric, hydronic (water), gas…) from any manufacturer either directly or by adding a "4-stage" relay board. Preheat starts at 50% of total heat capacity and room progress is monitored in real time. It incorporates a slide switch enabling the user to override the pre-set temperature by +/- 1 or 2C.

Depending on options this EMS also controls: Lighting, Fan, A/C, Damper (contact or modulating), different types of heat (gas, 0 --> 10v, Pulse Width Modulation, hydronic modulating valves...). A True Alarm output is available.

APPLICATIONS: offices, classrooms, stores… any premises where occupancy is usually predictable and the heating system requires a modulating heat output (0 -> 10v) or damper control.

For more information click here: EMS-SS96 Manual   

Click here for more information

New Product - EMS-SS99     click to enlarge picture

The EMS-SS99 (new ) is an enhanced EMS-SS96 with the extra following features:

1.     It can accommodate up to 3 temperature sensors (or probes) for superb flexibility. You can now monitor such things as space temperature, outside temperature, mixed air temperature, discharge temperature, etc.  We have already developed a number of different algorithms which have been running for more than a year

2.     The motion detector can be part of the EMS and protrudes through the front cover (versus remotely mounted). The range is not as good as a remotely mounted alarm grade motion detector but it does cut down installation costs

3.     We can substitute the door contact for a push button mounted on the side of the EMS for after hours override or other scenarios 

For more information click here: EMS-SS99 Manual  

Click here for more information

.